Getting started with the eHub

Connecting and starting the eHub the first time

Written By Markus Solberg (Super Administrator)

Updated at October 16th, 2023

This article will help you trough the first time connecting and starting of your eScore system. You will be guided trough how to connect to the eHub user interface and how to configure and setup the units connected to the system.

Delete

Prerequisites

Please see our videos for how to assemble the range at our eScore YouTube channel.

The eHub is located in the "power cabinet with eHub"The inside of "power cabinet with eHub". A switch (blue rectangle) and the eHub(red rectangle).               

How to access the eHub user interface

eHub user interface.

System sketch of how the different units are connected to the eScoreNet and the shooting range network.

To access the eHub the first time, you need to connect your tablet or PC to the eScoreNet.

eScoreNet is the closed network for the eScore system only, securely connecting eScore equipment together.

eScoreNet is available by wired and WiFi connection.

Wired connection

You need to connect to one of the spare ports in the switch located in the "power cabinet with eHub". Connected devices will get an IP-address from the eScoreNet.

The switch is located inside the "power cabinet with eHub" (red rectangle).   

Delete

Wireless connection (WiFi)

You need to connect to the firing line wireless network with SSID KTS_FL_XX, where XX is system number, e.g. KTS_FL_01. Connected devices will get an IP-address from the eScoreNet.

The username and password is printed on a label on the monitor antenna.

Delete


Enter 10.10.0.1 in your favorite internet browser to get access to the eHub user interface.


If the eHub is connected to your local club network trough the WAN port in the eHub cabinet, you can access the eHub by entering the host IP-address of the eHub.

Delete

Shooting range network

We reccomend that you connect to the eHub trough your local shooting range network, so that that you also get access to internet and printers. 

Now that you already are connected to the internal eScoreNet, you can get the host IP-address by expanding the question below.

How to get the host IP-address of the eHub?

How to get the host IP-address of the eHub

  1. Select the eStatus application, marked with a red border.
  2. Expand the eHub group to the right, to find the external IP-address you need to connect to the eHub user interface
  3. Remember the host IP-address listed

 

Delete

Access to the eHub trough the local shooting range network

Your PC or tablet, and eHub needs to be connected to the local shooting range network

Enter the host IP-address of the eHub into your favorite web browser:

The local address is provided by the router on the local shooting range network, and will vary from range to range.

Delete

Remember to reserve the eHub host IP-address

As IP-addresses provided by the router(DHCP) most probably will change over time, for instance after a reboot, it is advised  to reserve the given IP-address. Please contact your range IT admin to help you with this.

Connected units

All units are automatically identified by the system. But for eScore to know how many targets, antennas and shooter monitors that belongs to the range, we need to register them.

By doing this we know how many units to expect, and the system will immediately tell if not all units are powered on or there is an issue with one of the units. The range status is available by the eStatus page.

How to register connected units

First, you need to access the eHub user interface. And then go to "Settings" page.

Click or tap "configure connected units" to expand.Normally all targets has been pre-configured with correct target numbers, so all you need to do is scroll down to "REGISTER CURRENT UNITS" and click the button. All these units will be registered to belong to this range. When checking for status, it will expect these units to be powered on and working, if not you will get warnings or alarms.

Delete

Assign

It is possible to change or alter the pre-configure lane number if needed.

Decision Tree

Do you want to know how to assign a lane number?

  • Yes
  • Add Button

In Settings->"Configure connected units", it is possible to register connected units and assign lane numbers to targets.

Unregistered units

For unregistered units, you need to click or tap the plus icon to add the target to the registered units. We will suggest the default value that has been pre-configured, but it is possible to re-assign to another lane number.

Registered units

Fore registered units, you can click or tap to expand, and assign a new lane number.



User preferences

Click or tap the settings page.

Click or tap "User preferences"to expand.

Choose language from the drop-down list, and click or tap save.


Configure WinGPS Cloud

Delete

Prerequisite

You need an active WinGPS Cloud subscription to be able to use the WinGPS Cloud spectator view service available at https://live.kongsberg-ts.no
Please contact sales@kongsberg-ts.no to get more information or to purchase a subscription. 

Locate the username and password from the e-mail received by Kongsberg Target Systems.

Go to the settings page on the eHub and click or tap "Cloud" to expand.

Username and password

Enter username and passord received from Kongsberg Target Systems, and live internet spectator viewing will be up and running for your system.

Location

If your shooting range has multiple physical locations, you need to specify the location ID. If you only got one location, please use location Id 1.

Delete

Example

If your indoor range and outdoor range are located at two different locations, you need to separate them with different location Ids. 


Range

A range is a firing line and target line linked together. For instance a 100yd range and a 600yd range may be two different ranges.

Example

Example of how customer name, location name and range name is listed on WinGPS Cloud.


 

System status

To get an overview of the system status, you can navigate to the eStatus page. Here you will get a quick and brief overview of registered unit. You will get connection status, battery warnings and sensor warnings etc.

At the image above, everything is working as intended. No alarms or warnings.

Navigation 

On the overview page, you will get a quick overview. To get more details click or tap the header to expand.

To get more details of a unit, click or tap to expand.

Here you get all details of a unit.

Low battery warning.

Delete


Connection status

If one or more units are disconnected, you will get an alarm.

Only 1 of 7 monitors are connected 

Only monitor at lane 8 is connected

Connection status is DISCONNECTED.

Delete